Wednesday, May 23, 2007

14k White Gold, Round, Diamond Stud Earrings (1/2 cttw, J-K Color, I2-I3 Clarity), Earrings,+Round,+Diamond+Stud+Earrings.jpg">

14k White Gold, Round, Diamond Stud Earrings (1/2 cttw, J-K Color, I2-I3 Clarity)

unbelievably cloudy and yellow. Not worth it at any price. Better off buying quality cubic zirconia in 14K gold setting. Save your money.

By A. Lieberman (New Jersey)

would recommend these earrings to anyone. Yes, they are I3 clarity, which means that there are visible flaws. However, these diamonds go on your ear, not your hand, and for that reason I think that they make an excellent value for diamond earrings. The diamonds are sufficiently colorless, and I would definitely buy them again for myself or for a gift (although perhaps not for someone who is very picky about diamonds).

The cut of a diamond has the most effect on its sparkle, or brilliance. Even if the diamond has perfect color and clarity, a poor cut can make a diamond look dull. Blue Nile carries only the highest grades of diamond cut, for the most sparkle. Learn how to choose the right diamond cut with the most brilliance for your budget.??

The cut of a diamond determines its brilliance. There is no single measurement of a diamond that defines its cut, but rather a collection of measurements and observations that determine the relationship between a diamond's light performance, dimensions and finish. Most gemologists consider cut the most important diamond characteristic because even if a diamond has perfect color and clarity, a diamond with a poor cut will have dulled brilliance.

The width and depth can have an effect on how light travels within the diamond, and how it exits in the form of brilliance.

Too Shallow: Light is lost out the bottom causing the diamond to lose brilliance.
Too Deep: Light escapes out the sides causing the diamond to appear dark and dull.

1 comment:

The Diamond Guru said...

Diamond Cut
Diamond cut refers to the angles and proportions of a diamond.

Based on scientific formulae, a well-cut diamond will internally reflect light from one mirror-like facet to another and disperse and reflect it through the top of the stone. This results in a display of brilliance and fire. Well-cut diamonds are therefore placed higher on the Diamond Quality Pyramid than deep or shallow-cut diamonds and a well-cut diamond is more valuable.

The cut of a diamond is what determines how the light that enters the diamond is reflected and therefore how much fire and brilliance the diamond will exude. A diamond that is cut too shallow with respect to its width will allow too much light to pass straight through the diamond, leaving little light to reflect. Such a diamond will appear dull and lacking in brilliance. Alternatively, a diamond that is cut too deeply will allow light to escape from the sides of the diamond and also appearing dull.

Fine or Well Cut Diamonds
When a diamond is cut to proper proportions, light is reflected from one facet to another and then dispersed through the top of the stone. Within the Well Cut standards are the sub categories of Ideal, Excellent, and Very Good.

Shallow Cut Diamonds
When the cut of a diamond is too shallow, light escapes through the pavilion before it can be reflected.

Deep Cut Diamonds
When the cut of a diamond is too deep, some light escapes through the opposite side of the pavilion.

Did you know that if the diamond is poorly cut, the colour and clarity can not make up for it?The cut of a diamond is what makes a rough diamond sparkle and shine. If a diamond is poorly cut, the light that enters the diamond from above will leak out of the sides and bottom of the stone, and the diamond will not have the optimum amount of sparkle or fire—regardless of its colour or clarity.

Diamond cut is perhaps the most important of the four Cs, so it is important to understand how this quality affects the properties and values of a diamond. When a diamond is well-cut, light enters through the table and travels to the pavilion where it reflects from one side to the other before reflecting back out of the diamond through the table and to the observer's eye. This light is the brilliance and it is this flashing, fiery effect that makes diamonds so attractive.

Deep-cut diamonds will have a higher carat weight, but it is clearly the less desirable diamond.

Many jewellers will not discuss cut proportions unless the customer specifically asks; a diamond that is heavier in carat weight but poorly proportioned and badly cut should be priced alot less than a diamond of similar carat weight having a excellent - Very Good cut grade. Consumers often do not look at the full facts when selecting a diamond and only compare diamonds on the carat, colour and clarity grades forgetting about the cut grade. This gives the buyer a false impression of a great deal. A diamonds price can be greatly effected by the cut grade.

In a poorly cut diamond, the light that enters through the table reaches the facets and then 'leaks' out from the sides or bottom of the diamond rather than reflecting back to the eye. Less light reflected back to the eye means less brilliance. The way a diamond is cut, its width, depth, roundness, size and position of the facets determine the brilliance of the stone.

Even if the colour and clarity are perfect, if the diamond is not cut to good proportions, it will be dull and less impressive to the eye.

Don't confuse diamond "cut" with "shape."
Diamond shape refers to the general outward appearance of the diamond, such as round, emerald, princess, asscher, cushion, radiant, oval, marquise, radiant or pear shape.

In order to cut a stone to ideal proportions, much of the rough diamond is sacrificed, leaving a stone with a smaller carat weight. Diamond cutters sometimes sacrifice ideal proportions to end up with a larger, more profitable stone because of the carat weight. Industry standard valuation of diamonds (Rapaport) does not take into account a diamond's proportions, thus a larger diamond with fair proportions will be worth more than the smaller diamond with good proportions to a diamond cutter (colour and clarity being equal). Consequently, ideal cut stones are rarer and harder for wholesalers and jewellers to find and they are priced accordingly.

The depth and table measurements, which are partly used to determine how good the cut is, are given in percentages of the girdle (the widest part of the diamond). So, if a diamond's girdle measures 10 millimeters, the table measures 5.6 mm, and the total depth measurement is 6.25 mm, it would have a table of 56% and a depth of 62.5%.

In a round brilliant cut diamond, measurements are generally listed as maximum diameter, minimum diameter and total depth. The average of the first two measurements is the real "size" of a diamond. Deeper diamonds will usually have a slightly smaller diameter than diamonds that are spready cut stones, regardless of the diamond shape.

In fancy cut diamonds such as an emerald, princess, asscher, cushion, radiant, oval, pear or marquise cut, the measurements are generally listed as length, width, and depth. By dividing the length by the width we can calculate the "Length/Width" ratio for a fancy shape diamond. Different cutting styles have different preferred ranges, but the length to width ratio is primarily a matter of taste.

Depth %
This number indicates how "deep" a diamond has been cut. For round diamonds the depth should not usually exceed 64% unless cost is a major factor. Diamonds with smaller depth numbers tend to have a larger diameter (see measurements above). For that reason two diamonds of the same carat weight may appear to be different sizes to the naked eye depending on how deeply they've been cut. Depth Percentage is one of most important aspects in determining the final "beauty" of a diamond.

Table %
This number indicates the size of the large flat facet located at the top center of the diamond. If the table facet on a diamond is very large, it may be a sign of a diamond that was cut in order to maintain maximum weight instead of maximum sparkle. Table Percentage is one of most important aspects in determining the final "beauty" of a diamond.

This characteristic refers to the finishing or final polishing of the facets, or flat surfaces.The polish of a diamond is generally defined as either Poor, Fair, Good, Very Good, or Excellent. When purchasing a diamond, select one with a polishing grade of Good or above. Many people wrongly believe that "Very Good" or "Excellent" polish ratings will make a diamond visibly more brilliant or dispersive. The diamond cutter carefully polishes every facet on the diamond to shine and be free from polishing imperfections. Polish is a minor aspect in determining the final beauty & value of a diamond.

Symmetry refers to how well the diamonds facets are aligned and "pointed". GIA defines symmetry as "the exactness of shape and placement of facets". Diamonds with a symmetry rating of "Poor" or "Fair" often times suffer from external imbalances such as an off-center or tilted table, off-center culet, misshapen facets, or wavy girdle. Diamonds with ratings of "Good" or better are most preferred. Symmetry ratings are more important than polish, but not nearly as important as depth and table. The symmetry of a diamond is generally defined as either Poor, Fair, Good, Very Good, or Excellent. When purchasing a diamond, select one with a symmetry grade of Good or above.

The girdle is the outer edge of a diamond. It usually has a frosted appearance. Many diamonds are also finished with a fully polished or even a faceted girdle. This characteristic does not affect the value of a diamond and is often more a reflection the diamond cutter's preference. The girdle is rated in terms of thickness. Girdle size is generally defined as either Extremely Thin, Very Thin, Thin, Medium, Slightly Thick, Thick, Very Thick, or Extremely Thick. The girdle can also be described as a range of these terms such as Thin to Thick. When purchasing a diamond, select one with a girdle that is neither Extremely Thin nor Extremely Thick.

The culet is the point at the bottom of the diamond. Most diamonds today do not have a culet (meaning all the facets come to a sharp point). Culet sizes from none to very small are most preferred, since larger culets can leak light out the bottom of the diamond. The culet is generally graded as None or Pointed, Very Small, Small, Medium, Slightly Large, Large, Very Large, and Extremely Large. Smaller is more desirable.

A diamond's ability to reflect light determines the display of fire and brilliance. Round brilliant cut diamonds are usually cut with 58 facets, or separate flat surfaces. These facets follow a mathematical formula and are placed at precise angles in relation to each other. This relationship is designed to maximize the amount of light reflected through the diamond and to increase the brilliance.

The Diamond Cut Grade
The overall cut grade of a diamond is determined by taking into account all of the factors described above and plotting the results into a table. The lowest score becomes the overall cut grade of the diamond. When classifying a diamond with an overall finish grade - the lowest assigned grade for any individual characteristic is always used. For example: If the table percentage falls within Ideal yet the depth percentage is in the Very Good range, the diamond is classified as Very Good.

Gemologists agree that the best cut diamonds are those that follow a set of formulae calculated to maximize brilliance. These formulae can be seen in a diamond's proportions, most importantly how the depth compares to the diameter, and how the diameter of the table compares to the diameter of the diamond.

However, the variance in the proportions between an Ideal Cut and a Poor Cut can be difficult to distinguish by an untrained eye. Because cut is so important, several grading methods have been developed to help consumers determine the cut, known as the finish grade, of a particular diamond. In general, these grades are:

Ideal - Excellent - Very Good - Good - Fair - Poor
Selecting the grade of cut is really a matter of preference. To make the best selection, you need to understand the various diamond finish grades. Please note that the descriptions below are general guidelines for the finish grade of a diamond's cut.
Ideal Cut Diamonds
The Ideal cut diamond is designed to maximize brilliance, and with the typically smaller table size these diamonds have the added benefit of creating a great deal of dispersion or 'fire' as well. Ideal quality diamonds are truly for the person who enjoys knowing that they have one of the finest quality diamonds that money can buy. The Ideal cut category applies only to round brilliant cut diamonds.
Excellent Cut Diamonds
In the case of round diamonds, many Excellent Cut diamonds have cuts that are the equal of any Ideal Cut diamond, though they often can be purchased at slightly lower prices than Ideal Cuts. Excellent cut diamonds are intended to provide maximum brilliance and fire. Like the Ideal Cut, these are also for the person who enjoys knowing that he has one of the finest diamonds that money can buy.
Very Good Cut Diamonds
Very good cut diamonds reflect most of the light that enters them, dispersing a good deal of brilliance. With these diamonds, the diamond cutters have chosen to stray slightly from the preferred diamond proportions in order to create a larger diamond. The result is that these diamonds fall slightly outside of some proportions for table size or girdle width, however, in many cases most of the parameters of diamonds in this range will overlap with certain parameters of diamonds in the Ideal or Excellent cut ranges. Generally, the price of these diamonds in slightly below that of Excellent cut diamonds.
Good Cut Diamonds
Good cut diamonds are diamonds that reflect most of the light that enters them. Their proportions fall outside of the preferred range because the diamond cutter has chosen to create the largest possible diamond from the original rough crystal, rather than cutting extra weight off to create a smaller excellent cut quality diamond. Diamonds in this range offer excellent value for people who want to stay in a budget without sacrificing the quality or beauty of the diamond.
Fair & Poor Cut Diamonds
A diamond graded as fair or poor cut reflects only a small proportion of the light that enters it. Typically these diamonds have been cut to maximize the carat weight over most other considerations.
The proportions are not the same for every diamond shape. Many of the diamond shapes require their own guidelines in order to achieve maximum beauty & brilliance. Due to the mathematical differences specific to each diamond shape, the table and depth guidelines are formulated to maximize fire and brilliance for the different diamond shapes.
The table below details the various laboratories and the different grading scales they use, you will notice that there is an over lap in some of the grades and that the top grade is not the same for each laboratory.

GIA and DCLA have Excellent as their top grade, HRD has Very Good for its top grade whilst AGS splits its top grade category into Ideal and Excellent.

DCLA & GIA have the same grade categories except DCLA calls its second lowest grade Medium whereas GIA calls it Fair. AGS has the same breakdown of catgeories as both DCLA & GIA except for the top grade of Excellent where it breaks down that category into two sections of Ideal - AGS0 and Excellent - AGS1.
AGS is the only Grading Laboraotory that actually has a grade called Ideal. The term Ideal Cut Diamond is a widely and quite oftenly misused marketing term used by Jewellers and Diamond Dealers to describe a cutting style based on proportions rather than an actual Ideal grade by a laboratory unless the diamond has been certified by AGS with and AGS grade of Ideal - AGS0.

When comparing Diamond Certificates it is important to refer to these 3 grading scales for cross referencing. However the true test to evaluate a diamond is to view it in person and compare it with other diamonds next to each other at the same time.
There are many different diamond grading laboratories available to the diamond-buying public. Some of the more well known grading laboratories are: GIA (Gemological Institute of America), DCLA (Diamond Certification Laboratory of Australia), AGS (American Gemological Society), HRD (Hoge Raad Voor Diamant; Diamond High Council), EGL (European Gemological Institute) and the IGI (International Gemological Institute).
Each of these diamond grading laboratories has their own criteria and method of grading loose diamonds, but they all operate within a high set of parameters, in regards to grading a diamond's attributes and dimensions. Be aware that as each grading laboratory has its own methods, each grading laboratory also has its own expense guides for preparing a certificate and these grading laboratories differ in their standards and level of strictness.
GIA's standards for grading have set the bar for all other gemological laboratories. DCLA & AGS are on par with GIA for grading standards. In fact, it is the AGS grading for Cut that served as an impetus for the GIA to recently include Cut grading to their grading reports. HRD out of Antwerp, Belgium is also a greatly respected name in the diamond industry. A certificate from any of these grading laboratories - GIA, DCLA, AGS, HRD - can be considered accurate, reliable and trustworthy.
Another pair of well known grading laboratories is EGL and IGI. Each of these grading laboratories is fine in their own right, but neither have the name and reputation of GIA or any of the other previously mentioned grading laboratories. Much of this is due to the fact that both EGL and IGI tend to over-grade the loose diamonds, as well as having less strict grading scales and training requirements for their gemologists.
For example, EGL created the grade of SI3 for Clarity. This is the equivalent of the I1 or P1 by GIA, DCLA, AGS & HRD standards (which do not accept the SI3 grade in their grading scales). In addition to this, a diamond that received a grade in clarity of VS2 from either EGL or IGI would most likely receive a grade of SI1 from the GIA, AGS or DCLA. A diamond's clarity grading has a greater influence on the price of a diamond and increases the value more than the colour grading of a diamond. There has also been known to be a variance on the colour grading which also impacts upon the price of the diamond.
It is important to remain aware of the facts and differences with certification and the process as well as the different grading standards each diamond grading laboratory offers. While it might be possible to find diamonds with the same grade notably cheaper but having certificates from different grading laboratories, there are no huge bargains within the diamond industry. Remember, if it sounds too good to be true, it probably is and there usually is a reason.
It is important to keep in mind the fact that not all diamond grading laboratories are as well respected or as stringent in their grading as each other. Diamond grading laboratories should always be independent of any diamond retailers or wholesalers, to avoid any conflict of interests or bias.
Diamond Certificates are only of value when they are issued by an independent accredited diamond grading laboratory. Always make certain to identify the source of the certificate or diamond grading report. If you have not heard of the laboratory, it could very well be associated in some way with the store, jeweller or diamond wholesaler itself, and so have a vested interest in aiding the sale.
This is why you should always, as a first priority, insist on an independent diamond grading certificate from an accredited laboratory to support any added claims about a diamond and why Diamond Imports strongly recommend diamonds that have been Certified by DCLA, GIA, HRD or AGS.
DCLA is the only Independent Accredited Diamond Grading Laboratory in Australia, they are also the official CIBJO Grading Laboratory and the only official IDC - International Diamond Council Laboratory in Australia.

This is an informative link about Diamond Cut that you may find useful and interesting further reading.

Diamond Imports

Highest Quality Certified Diamonds